Production of radiation-modified
heat-shrinkable materials
in the Republic of Kazakhstan
heat-shrinkable materials
in the Republic of Kazakhstan
International certification
of manufactured products
of manufactured products
Own production in Kazakhstan
Development of Kazakhstan's export potential
Select the product you are interested in – heat-shrink sleeves or heat-shrink tapes – to learn about their design, technical specifications, advantages, and available sizes.
InsulTech, in collaboration with Satbayev University (KazNITU named after K. I. Satpayev), is implementing a strategically significant project for the production of radiation-modified heat-shrinkable materials—sleeves and tapes for anticorrosion, waterproofing, and thermal insulation protection of pipelines. The production facility is located in the Republic of Kazakhstan and meets the requirements for industrial operation under high loads and aggressive environmental conditions.
Spiral Wrapping
Application of the tape to the insulated surface using the spiral wrapping method with overlapping turns
A two-component system based on modified epoxy resin and a hardener. Designed for anticorrosion protection of metal pipes, welded joint areas, and other metal surfaces
Epoxy Primer (Optional)
Heat-Shrink Tape
The tape is made of a radiation-crosslinked polyethylene backing and a hot-melt adhesive. This two-layer material is used for insulation and protection of pipelines against corrosion
Construction
Стык трубопровода
Манжета
Пластина
Technical Specifications
Operating temperature range
from −60 °C to +60 °C
+60°С
24 months
Warranty period
24 months
-10°С
+60°С / +80°С
Ambient air temperature for joint insulation works
from −10 °C to +60 °C (+80 °C)
Service life
30–50 years
50 years
-60°С
Appearance
Camouflaging the pipeline’s thermal insulation material and enhancing its visual appearance
Fire resistance
Protection of the thermal insulation layer not only from environmental impacts but also from open flame
Pipeline protection
Protection of the thermal insulation layer of heating pipelines during above-ground installation
Advantages
Recommended tape width and consumption
InsulTech heat-shrink tape is designed for basic insulation of steel pipes or anticorrosion protection of pipeline components in field or factory conditions. The tape has a two-layer structure, but when used with an epoxy primer, it forms a three-layer anticorrosion protection system.
Outside diameter
Including the thermal insulation layer
215 mm
140 mm
1140 mm
730 mm
410 mm
240 mm
160 mm
1540 mm
920 mm
630 mm
355 mm
190 mm
1340 mm
820 mm
510 mm
300 mm
170 mm
133 mm
57 mm
1020 mm
630 mm
325 mm
159 mm
76 mm
1420 mm
820 mm
530 mm
273 mm
108 mm
1220 mm
720 mm
426 mm
219 mm
89 mm
Pipe diameter
Inclusive
Tape consumption
When insulating 1 running meter of pipeline
5,40 r.m.
3,51 r.m.
8,73 r.m.
8,81 r.m.
4,95 r.m.
6,02 r.m.
4,02 r.m.
11,80 r.m.
7,05 r.m.
7,60 r.m.
8,91 r.m.
4,77 r.m.
10,26 r.m.
6,28 r.m.
6,16 r.m.
7,53 r.m.
4,27 r.m.
Recommended width
Not less than
150 mm
150 mm
450 mm
300 mm
300 mm
150 mm
150 mm
450 mm
450 mm
300 mm
150 mm
150 mm
450 mm
450 mm
300 mm
150 mm
150 mm
Minimum overlap
During tape wrapping
25 mm
25 mm
40 mm
40 mm
40 mm
25 mm
25 mm
40 mm
40 mm
40 mm
25 mm
25 mm
40 mm
40 mm
40 mm
25 mm
25 mm
Custom-sized sleeves can be manufactured to meet specific requirements
The tapes are supplied in factory packaging and are accompanied by datasheets and certificates
Contacts
Fill out the form and we will contact you:
Or contact us directly:
By submitting this request, I consent to the personal data processing policy
Aigul Temerbekovna Bakesheva
Associate Professor, Department of Petroleum Engineering
Director of InsulTech LLP